BETON-ADD : Expanding, Plasticising , Non-shrink additive for cement

Single pack cementitious additive for cement.

Product Overview

  • Non shrink & prepacked.
  • Gaseous expansion system.
  • Excellent creep resistance .
  • Low dosage and economical.
  • Available in ready to use pack.
  • Reduction in water cement, ratio improves durability and reduces permeability.

Recommended Dosage

  • 225 Gms pouch per bag of cement.

Applications

  • Site applications.
  • Injection grouting to fill voids.
  • Excellent Slurry consistency.
  • Other cement grouts an injection slurry.
  • Post tension cable grouting.

Standards Compliance

  • Suitable for pressure grouting as per BS 8110 Part 1

Packaging

225 Gms pouch.

BETONGROUT-40 : General purpose, non-shrink cementitious grout

Single pack cementitious non shrink general purpose grout.

Product Overview

  • Non shrink & prepacked.
  • Noncorrosive will not attack reinforcement.
  • Low permeability will protect against salt attack.
  • Pumpable for easier placement.
  • Dry pack to flowable consistency.

Recommended Dosage

  • 25 Kg pack 3.75 Liter water  will yield 12.5±0.5 of grout.
  • Approximately 80 bags per m³.

Applications

  • Stanchion base.
  • Static machines.
  • Precast elements joints & pipe sleeves.
  • Electric tower and posts.
  • Racking , handrail & non load bearing column base plates.
  • Stair landing , blook fill , utility support & drains.

Standards Compliance

ASTM C-1107 , CRD C-621-Grade B

Packaging

  • Available in 25 Kg moisture resistance packing.

BETONGROUT -60 : Non-shrink cementitious grout

High performance precision non shrinks cementitious grout.

Product Overview

  • Air Release technology per ACI 351.1 R.
  • 95% Effective Bearing Area (EBA) is typically achieved.
  • Provides placement versatility: pour, pump, or dry pack
  • Minium 45-minute working time.
  • Permanent support for machinery requiring precision alignment
  • Does not contain gas generating additives.
  • Non-shrink from the time of placement.
  • Suitable for bulk mixing applications .

Recommended Dosage

  • Pourable 80 bags & Flowable 75 bags.

Applications

  • Stanchion base, bolt pockets & crane rail grouting.
  • Grouting of machinery and equipment to maintain precision alignment.
  • Non-shrink grouting of structural steel and precast concrete.
  • Permanent support for machinery requiring precision alignment  & dynamic load.
  • Grouting in anchors and dowels.
  • Support of tanks and vessels.

Standards Compliance

ASTM C-1107 Grade A, B & C, CRD C-621-93

Packaging

  • Available in 25 Kg moisture resistance packing.

BETONGROUT -90: Non-shrink high strength precision cementitious grout

High performance precision non shrinks high early strength cementitious grout.

Product Overview

  • Air Release technology per ACI 351.1 R.
  • Ninety-five percent Effective Bearing Area (EBA).
  • Provides placement versatility: pour, pump, or dry pack.
  • Extended working time up to 60 min.
  • Non-shrink from the time of placement.
  • Rapid strength gains from 12 hr , 1 day , 7 day and 28-day high compressive strength.

Recommended Dosage

  • Pourable eighty bags & Flowable 75 bags.

Applications

  • Grouting of precisely align machine.
  • Non-shrink grouting of heavy impact or dynamic load.
  • Wind turbine foundations , vertical roller.
  • Grouting in anchors and dowels.
  • Support of tanks and vessels.
  • Non-shrink grouting of structural steel and precast concrete.

Standards Compliance

ASTM C-1107 Grade A, B & C, CRD C-621-93

Packaging

  • Available in 25 Kg moisture resistance packing.

BETONGROUT -LV: Super Low viscosity ,non-shrink cementitious grout

Product Overview

  • Ultra-low viscosity type grout material.
  • It is a premix type; you can obtain ultra-low viscosity grout with stable quality just by mixing the specified amount of water.
  • Viscosity is lower than that of conventional grout, filling into narrow gaps and long spans can be performed smoothly.
  • Even with ultra-low viscosity, material separation does not occur and bleeding does not occur.
  • Since the water-powder cement ratio is relatively small, stable and high strength can be obtained.
  • Air Release technology per ACI 351.1 R.

Recommended Dosage

  • Pourable 85 bags & Flowable 80 bags.

Applications

  • Prestressed concrete bridge board works.
  • Repair and heavy business of prestressed concrete bridges.
  • Building structures, container structures, prestresses and structures of container structures.
  • Non-shrink grouting of structural steel and precast concrete.

Standards Compliance

ASTM C-1107 Grade A, B & C, CRD C-621-93

Packaging

  • Available in 25 Kg moisture resistance packing.

BETONGROUT -UW: Under water nonseparation type grout , non- shrink cementitious grout.

Product Overview

  • Cement-based non-shrink mortar with inseparability in water.
  • The special underwater inseparable admixture is mixed to minimize water pollution in the construction area.
  • Shows high fluidity and stable strength development while having inseparability in water.
  • Appropriate amount of calcium oxide-based expansion material is mixed, and it shows stable non-shrinkage even in seawater.

Recommended Dosage

  • Pourable 85 bags & Flowable 80 bags.

Applications

  • Seismic retrofitting of underwater parts of road bridges and piers
  • Repair work for underwater concrete structures
  • Various underwater civil engineering and construction work

Standards Compliance

ASTM C-1107

Packaging

  • Available in 25 Kg moisture resistance packing.

BETONGROUT -TG: Non-shrink , Gun Grade , Anti Sag pumpable grout

High performance precision non shrinks waterproof cementitious grout.

Product Overview

  • Pumpable/gun-grade consistency for clean ap plication.
  • Polymer modified for improved adhesion and durability.
  • Controlled fluidity with negligible segregation.
  • Watertight, non-shrink formulation.
  • Self-curing tendency for easier site work.
  • Fast and convenient application with minimal wastage.
  • Anti sag and hydrophobic.
  • Water permeability Confirms to IS 2645.

Recommended Dosage

  • 4.125 L per 25 Kg Bag will give gun grade consistency.

Applications

  • Filling tie-rod holes and slit holes in-situ concrete.
  • Meets the surface defects repair requirements of ACI 301.
  • Filling joints and small gaps in brick masonry and stone.
  • Anchoring bolts and dowels.
  • Precision grouting where non-shrink, watertight performance is required.

Standards Compliance

ACI 301

Packaging

  • Available in 25 Kg moisture resistance packing.